Tools
- Mikasa TL-40 ball repair tool
- Mikasa exchange valves
- Pocket knife (Flathead, Optional: Awl)
- Optional: Vacuum cleaner
Procedure
- Get the broken valve out of the ball.
- Sit down and clamp the ball between your legs with the valve up.
- Take the long end of Mikasa TL-40 and put in the valve.
- Circle a little bit to loosen the valve.
- Try to pull the valve out. The will most likely take multiple times. 0
- Optional: Get the pieces out of the ball.
- Option 1: Turn the ball with the hole down and shake the ball. 1
- Option 2: Turn the ball with the hole down and vacuum through the hole. 1, 3
- Option 3: Turn the ball with the hole up, remove the air and use the last bit of air to pump it multiple times. 1
- Option 4: Turn the ball with the hole up, remove the air and try to put the piece exactly underneath the hole. Try to vacuum it out. 1
- Option 5: Turn the ball with the hole up, remove the air and try to put the piece exactly underneath the hole. Try to use the awl to get it out. 2, 4, 5
- Get the new valve in the ball.
- Sit down and clamp the ball between your legs with the hole up.
- Put the new valve on the hole and inflate the ball.
- Press the valve on the hole with the short end of Mikasa TL-40.
- Try to press the valve into the hole and push with the flathead the sides of the valve towards the hole.
Legend
0 Potentially you will get it out in pieces and parts can end up falling into the ball.
1 Will only remove small pieces from inside the ball.
2 Will also remove bigger pieces from inside the ball.
3 Additionally, you can try to shake the ball sidewards.
4 Try to switch between the awl and the vacuum cleaner.
5 Be CAREFUL to not rupture the bladder.