Axle vs. Shaft Both serve the purpose of supporting rotating machine parts. Axles do not transmit torque. Shafts transmit torque.
Continue readingMove semantics (C++)
Since C++11 we can now use move semantics (move constructor, move assignment operator). They provide a perfomance boost over copy
Continue readingValve shutdown drill
The valve shutdown drill should be in your skill set if you dive with two regulator connected to one breathing
Continue readingVideo compression
Video compressing normally happens directly by the codec itself. It is realized based on two main strategies. They are called
Continue readingReduce video size (without quality loss?)
Sorry, but that is (nearly always) bullshit! It’s only possible if you remove unused parts like audio channels or subtitles
Continue readingInside Sankaku (aka. Cross inside ashi garami)
Position Entries
Continue readingLaufstile
1. Fersenlauf Ausführung: Beim Fersenlauf berührt als erstes die Ferse den Boden und dann wird über den ganzen Fuß abgerollt.
Continue readingLeglock-Positions
Default Positions (Straight) (Unlocked) Ashi Garami (aka. Single Leg X Guard or Irimi Ashi Garami) (Straight) Outside Ashi Garami (Straight)
Continue readingFundamental techniques (MMA)
Stand-up Fighting (Initial Position or from Stand-Up) – Punch: Jab, Cross, Hook, Uppercut – Kick: Front, Round, Side, Back, Heel
Continue readingJTAG Adapter – ARM 10-pin <---> ARM 20-pin
We’ve got a new microcontroller board, which got a 10-pin JTAG interface for external debugging. The problem was that we
Continue reading